Random Color HappyModel Mobula6 ELRS 1S F4 5A 2.4G RX AIO Nano3 200mW 0702 26000KV 65mm FPV Brushless TinyWhoop Drone

Description

Update log:

Mobula6 ELRS 2.4Ghz version comes with Updated ELRSF4 2G4 V3.1 flight controller since 25th Feb

V3.1 Version flight controller Updated

MPU6000 changed to ICM20689 because of MPU6000 discontinued

Onboard VTX changed to OPENVTX support 0mw~400mw

Pre-install Betaflight firmware which support ELRS V2.0 TX firmware

ExpressLRS is currently the most popular remote control link system. It has the characteristics of low latency and high packet rate, and its link quality is very reliable. Now we are about to release Mobula6 equipped with ExpressLRS RC link system, the new Mobula6 elrs would coming out with a new 0702 brushless motor, that would be the lightest brushless motors all over the world. We’re sure this would be a good option for you in the Tiny Whoop Season.

Features:
AIO Flight controller with ELRS Receiver and 5.8G VTX
Super light 1S 65mm Brushless whoop only 18.7g
Equipment with the lightest brushless motors-SE0702 only 1.46gram
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV

Specifications:
Brand Name: Happymodel
Item Name: Mobula6 ELRS 1S 65mm Brushless whoop drone BNF version
Wheelbase: 65mm
Size: 80mm*80mm*37mm
Weight: 18.7g

Receiver option:

2.4GHz ExpressLRS SPI receiver

915MHz ExpressLRS Serial-based receiver

868MHz ExpressLRS Serial-based receiver

	Mobula6 ELRS 2.4G	Mobula6 ELRS 915MHz	Mobula6 ELRS 868MHz
Flight controller	ELRS F4 2G4	CrazyF4 ELRS	CrazyF4 ELRS
Firmware target	CRAZYBEEF4SX1280	CRAZYBEEF4DX	CRAZYBEEF4DX
Built-in ExpressLRS receiver	SPI 2.4GHz	Serial-base 915MHz	Serial-base 868MHz
Built-in Dshot ESC	5A	5A	5A
Receiver antenna plug	SMD ceramic antenna	IPEX MHF3	IPEX MHF3
Onboard VTX power	25mw~200mw	25mw~200mw	25mw~200mw
Brushless Motor	0702 KV26000	0702 KV26000	0702 KV26000
Propeller	HQPROP 31mm Bi-blade	HQPROP 31mm Bi-blade	HQPROP 31mm Bi-blade
Battery	1s 300mah Lipo battery	1s 300mah Lipo battery	1s 300mah Lipo battery

Package includes:
Notice : because of shipping problem, there is no include 1S 300mah 30C LiHV Battery, if you want that ,please buy alone, thank you

Item Name	Qty
Mobula6 1S 65mm whoop Drone Frame	1
ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver	1
CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver
CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver
SE0702 KV26000 brushless motor	4
HQPROP 31mm bi-blade propellers(4cw+4ccw)	1
Runcam Nano3 1/3 CMOS 800TVL camera	1
Onboard 5.8G 25mw~200mw VTX	1
1S 300mah 30C LiHV Battery	0
1S Lipo/LIHV USB Charger	1
Propeller disassemble tool	1

Spare parts specifications:

Motor	Mode: SE0702 KV26000 Configu-ration:9N12P Stator Diamter:7mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.Len):Φ9.5mm14mm Weight(g):1.46g No.of Cells(Lipo):1S only
Propellers	HQprop31mmx2 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm Weight:0.2g
Flight controller	ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in ExpressLRS 2.4G/915MHz/868MHz receiver Built-in 5V 1A BEC Built-in voltage detection
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver	Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Could bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module ExpressLRS version 1.0.0 or 1.0.1 both compatible
Onboard Serial-based ELRS Receiver	Operation current: ~100Ma Rx To FC protocol: CSRF RF Frequency optional: 915mhz or 868mhz(EU) Antenna connector: IPEX4 Telemetry output Power: <17dBm Firmware target: Happymodel_RX_ES915RX Receiver protocol: CRSF Could bind with Happymodel ES915TX , Frsky R9M and DIY ELRS TX module(need to flash the same version ELRS firmware) Firmware flash via Betaflight pass-through
Onboard 5.8g VTX	Output power: 25mw~200mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready
Runcam Nano3	Model: RunCam Nano 3 Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V [email protected] Housing Material: ABS Net Weight: 1.2g Dimensions: L14mmW14mmH9mm
Lipo Battery	Capacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm Weight: 8g Connector: PH2.0

Model Number	Mobula6 ELRS
For Vehicle Type	Helicopters
Tool Supplies	other
Four-wheel Drive Attributes	other
Remote Control Peripherals/Devices	Remote Controller
Upgrade Parts/Accessories	other
RC Parts & Accs	RECEIVERS

Material	Composite Material
Origin	Mainland China
Recommend Age	14+y
Use	Vehicles & Remote Control Toys
Brand Name	happymodel

Delivery & Shipping

Great news, we offer international shipping services and deliver to over 200 countries. The more of you we can reach the happier we are.

How does your delivery system work?

Packages will be shipped via a courier service which is dependant on the size and weight of the product. All packages are tracked and you will receive an email with this information when your order has been shipped.

Customs fees are not handled by us so please be aware that when you consent to packages being delivered you may incur custom fees when they arrive.

Delivery timings

Delivery timescales depend on the location, please see below our estimated shipping times…

United States – 10-20 business days
Canada, Europe – 10-20 business days
Australia, New Zealand – 10-30 business days
Central & South America – 15-30 business days
Asia – 10-20 business days
Africa – 15-45 business days

Returns & Refunds

Cancellations

Don’t worry, all orders can be cancelled until the point of shipping. All you need to do to cancel an order it contact us as soon as possible.

Refunds & Exchange

We care about you and your customer satisfaction so if you need a refund you can request one no matter what.

If your refund is approved, it will be processed and applied back onto your payment method within 14 working days.

We also offer an exchange service, just contact us as soon as possible and we will take it from there.

Random Color HappyModel Mobula6 ELRS 1S F4 5A 2.4G RX AIO Nano3 200mW 0702 26000KV 65mm FPV Brushless TinyWhoop Drone

Buy With Confidence

100% Safe Payment

You May Also Like...

Description

Specifications

Reviews

Add Review

Delivery